The Influence of Raw Material Inventory Control on Production Targets at Wery Bakery in Gunungsitoli City
Keywords:
Controlling, Raw Material Inventory, Production TargetsAbstract
Inventory management is a planned approach to determine what to order, when to order and how many orders and how much stock so that the costs associated with purchasing and storing are optimal without disrupting production and Production targets are company limits on a production output based on planning- plans set by the company. The purpose of this research is to determine the control of raw material inventory at Wery Bakery in Gunungsitoli City, to determine the production target at Wery Bakery in Gunungsitoli City, to find out whether there is an influence of raw material inventory control on production targets at Wery Bakery in Gunungsitoli City and to find out how much The big influence of controlling raw material supplies on production targets at Wery Bakery in Gunungsitoli City. The total sample is 13 people, Quantitative research type. The results of the study that: 1). All questionnaires used in data collection in the field were declared feasible and valid to use, where rxy>rtable, 2). The value based on the calculation of the determinant coefficient, the correlation of variable X (processing of raw material supplies) to variable Y (production target) was 42, 25%. 3). From the results of simple linear regression calculations obtained the equation Y = 13.880 + 0.637 (X). 4). t test with dk = 13 at a significant level = 0.05 where tcount> t table is 2.837> 2.201 So it is proven that the accepted hypothesis is Ha, namely there is an influence of raw material inventory control on production targets at Wery Bakery in Gunungsitoli City and Ho is rejected.
References
Alleva, J. M., Grünjes, C., Coenen, L., Custers, M., Vester, P., & Stutterheim, S. E. (2024). A randomized controlled trial investigating two protective filtering strategies to mitigate the effects of beauty-ideal media imagery on women’s body image. Computers in Human Behavior, 155(February), 108178. https://doi.org/10.1016/j.chb.2024.108178
Berber, A., Findikli, M. A., Marescaux, E., Rofcanin, Y., Mughal, F., & Swart, J. (2023). Exploring the effects of reduced load work arrangements (RLWAs): The role of individual autonomy and workplace level justice perceptions. European Management Journal, 41(5), 720–729. https://doi.org/10.1016/j.emj.2022.04.002
Ceraso, A., Policastro, G., Muscetta, M., Clarizia, L., & Cesaro, A. (2024). Implementing a sustainable process for the recovery of palladium from spent catalysts at industrial scale: A LCA approach. Journal of Environmental Management, 358(March), 120910. https://doi.org/10.1016/j.jenvman.2024.120910
Deepa, R., Sekar, S., Malik, A., Kumar, J., & Attri, R. (2024). Impact of AI-focussed technologies on social and technical competencies for HR managers – A systematic review and research agenda. Technological Forecasting and Social Change, 202(March), 123301. https://doi.org/10.1016/j.techfore.2024.123301
Ebbes, R., Schuitema, J. A., Koomen, H. M. Y., Jansen, B. R. J., & Zee, M. (2024). Self-regulated learning: Validating a task-specific questionnaire for children in elementary school. Studies in Educational Evaluation, 81(February), 101339. https://doi.org/10.1016/j.stueduc.2024.101339
Eisenberg, Y., Heider, A., Labbe, D., Gould, R., & Jones, R. (2024). Planning accessible cities: Lessons from high quality barrier removal plans. Cities, 148(February), 104837. https://doi.org/10.1016/j.cities.2024.104837
Elena Villalba-Pastrana, M., & Patricia Güereca, L. (2024). Environmental impacts of water, food and energy nexus in Mexico City from an Organizational Life Cycle approach. City and Environment Interactions, 22(February), 100143. https://doi.org/10.1016/j.cacint.2024.100143
Fareri, S., Apreda, R., Mulas, V., & Alonso, R. (2023). The worker profiler: Assessing the digital skill gaps for enhancing energy efficiency in manufacturing. Technological Forecasting and Social Change, 196(January), 122844. https://doi.org/10.1016/j.techfore.2023.122844
Gibbs, J. L., Eisenberg, J., Fang, C., & Wilkenfeld, J. N. (2023). Examining how organizational continuities and discontinuities affect the job satisfaction of global contractors. Journal of International Management, 29(5), 101046. https://doi.org/10.1016/j.intman.2023.101046
Huang, Y., Li, K., & Li, P. (2023). Innovation ecosystems and national talent competitiveness: A country-based comparison using fsQCA. Technological Forecasting and Social Change, 194(July), 122733. https://doi.org/10.1016/j.techfore.2023.122733
Khan, A. N., Mehmood, K., & Kwan, H. K. (2024). Green knowledge management: A key driver of green technology innovation and sustainable performance in the construction organizations. Journal of Innovation and Knowledge, 9(1), 100455. https://doi.org/10.1016/j.jik.2023.100455
Koloszár, L., Wimmer, Á., Takácsné György, K., & Mitev, A. (2024). Tournament rituals and experiential competence development in higher education: A case of a unique conference series. International Journal of Management Education, 22(1). https://doi.org/10.1016/j.ijme.2023.100929
Kraus, S., Ferraris, A., & Bertello, A. (2023). The future of work: How innovation and digitalization re-shape the workplace. Journal of Innovation and Knowledge, 8(4), 100438. https://doi.org/10.1016/j.jik.2023.100438
Liu, F., Yu, Y., Fang, Y., Zhu, M., Shi, Y., & Xiao, S. (Simon). (2024). Lean strategy in SMEs: Inventory leanness, operational leanness, and financial performance. Asian Journal of Shipping and Logistics, July 2023. https://doi.org/10.1016/j.ajsl.2024.02.003
Lulovicova, A., & Bouissou, S. (2024). Life cycle assessment as a prospective tool for sustainable agriculture and food planning at a local level. Geography and Sustainability, 5(2), 251–264. https://doi.org/10.1016/j.geosus.2024.01.008
Mello, R., Erro-Garcés, A., Dickmann, M., & Brewster, C. (2023). A potential paradigm shift in global mobility? The impact of the COVID-19 pandemic. International Business Review, October. https://doi.org/10.1016/j.ibusrev.2023.102245
Pattinson, S., Cunningham, J. A., & Preece, D. (2023). Harnessing creative tensions: A micro-level study of value creation. Journal of Business Research, 166(April), 114150. https://doi.org/10.1016/j.jbusres.2023.114150
Petersen, S. O., Ma, C., Hilgert, J. E., Mjöfors, K., Sefeedpari, P., Amon, B., Aarnink, A., Francó, B., Dragoni, F., Groenestein, K., Gyldenkærne, S., Herrmann, C., Hutchings, N. J., Kristensen, I. S., Liu, J., Olesen, J. E., & Rodhe, L. (2024). In-vitro method and model to estimate methane emissions from liquid manure management on pig and dairy farms in four countries. Journal of Environmental Management, 353(October 2023). https://doi.org/10.1016/j.jenvman.2024.120233
Shackleton, C. M., Adeyemi, O., & Setty, S. (2024). Forest Policy and Economics Why are non-wood forest products still the poor relative in Global Forest Resources Assessments ? Forest Policy and Economics, 163(September 2023), 103232. https://doi.org/10.1016/j.forpol.2024.103232
Shu, X., Xie, L., Kotze, D. J., Jauni, M., Lettojärvi, I., Suonio, T. H., Nagase, A., & Lehvävirta, S. (2024). Influence of façade orientation, floor height, substrate pH, and microbial inoculation on woody plants’ performance in vegetated façades in Southern Finland. Urban Forestry and Urban Greening, 94. https://doi.org/10.1016/j.ufug.2024.128280
Sierra-Fontalvo, L., Polo-Cardozo, J., Maury-Ramírez, H., & Mesa, J. A. (2024). Diagnosing remanufacture potential at product-component level: A disassemblability and integrity approach. Resources, Conservation and Recycling, 205(October 2023), 107529. https://doi.org/10.1016/j.resconrec.2024.107529
Smirnova, E., Hajiyev, N., Glazkova, I., & Hajiyeva, A. (2024). Production companies: Evaluation of accessibility and efficiency of transportation and manufacturing processes. Asian Journal of Shipping and Logistics, 40(1), 52–60. https://doi.org/10.1016/j.ajsl.2024.01.002
Vijay, D., Kulkarni, M., Gopakumar, K. V., & Friedner, M. (2024). Disability inclusion in Indian workplaces: Mapping the research landscape and exploring new terrains: Disability inclusion in Indian workplaces. IIMB Management Review, 36(1), 39–47. https://doi.org/10.1016/j.iimb.2024.02.004
Wang, R., & Haller, P. (2024). Dynamic material flow analysis of wood in Germany from 1991 to 2020. Resources, Conservation and Recycling, 201(October 2023), 107339. https://doi.org/10.1016/j.resconrec.2023.107339
Wei, J., Zhang, X., & Tamamine, T. (2024). Digital transformation in supply chains: Assessing the spillover effects on midstream firm innovation. Journal of Innovation and Knowledge, 9(2), 100483. https://doi.org/10.1016/j.jik.2024.100483
Ye, G., Zhu, Y., Bao, W., Zhou, H., Lai, J., Zhang, Y., Xie, J., Ma, Q., Luo, Z., Ma, S., Guo, Y., Zhang, X., Zhang, M., & Niu, X. (2024). Jo ur na l P r f. Value in Health. https://doi.org/10.1016/j.jval.2024.04.009
1.jpg){kind=logo}
